SG赛车开奖号码
PT-522 yellow primer is a rust inhibitive alkyd primer intended for use over metals that are bare, scuffed, sanded, lightly rusted, abrasive blast and/or previously painted surfaces. It shows excellent anti corrosion properties. PT-522 chemically etches into the surface to provide exceptional adhesion and durability. Moisture in the air causes the zinc chromate to react with the metal surface, and it forms a passive film that prevents corrosion. In addition to metals, PT-522 may be applied to wood, composite and concrete surfaces. PT-522 is not resistant to all solvents, i.e. MEK and Acetone.
PT-522 is most commonly available in Yellow and Green, but can be provided in red.
SHELF LIFE & STORAGE: 1 year when stored unopened in original factory filled containers between 50⁰-80⁰ Fahrenheit.
SURFACE PREPARATION INSTRUCTIONS: ALL SURFACES: Remove all dirt, grease, oil, salt and chemical contaminants by washing the surface with a suitable detergent cleaner/ degreaser. Rinse thoroughly with water. If you wish to use solvents PTI recommends IPA, Acetone or MEK. Rinse thoroughly with fresh water and allow to fully dry. Remove all remaining dust and debris by lightly wiping the surface with a tack rag or cheese cloth. All surfaces must be dry at time of application. See Tech Data Sheet for more detailed instructions.
MIXING INSTRUCTIONS: Mix the paint on a shaker for 5 – 10 minutes for optimal results.
Apply PT-522 using conventional air spray equipment, HVLP, Apollo Spray system. Please consult with a PTI representative for specific equipment recommendations and settings.
EQUIPMENT CLEANUP: Use clean Acetone or PT-1022X66 Reducer. Do not allow material to dry or cure inside any equipment.
Safety Precautions: Comply with all local safety, disposal and transportation regulations. Check the Safety Data Sheet (SDS) and label of the individual products carefully before using the products. SDS’s are available on request.
Check out our Current Sales and follow us on Facebook, LinkedIn, Instagram and Twitter